Session5.1

Create a design that you would want to embroider or laser cut using TurtleStitch or BeetleBlocks. Describe the process on your blog. Include images of the code and the on-screen rendering.



https://www.turtlestitch.org/users/imdq21

In this embroidery project, I use TurtleStitch to create a mouse. There is a formula I heard recently about how do simply draw a mouse, which is 7+2=9. The first step I do is find out the starting point for the 7. Since every small square represents 1, I count for the distance and locate coordinate (0,90). To let the turtle going to the point without a track, I use clear and pen down to move the turtle starting at (0, 90). After the turtle gets to the starting point, I want the turtle to move right and going down. In order not to let the string goes too long, I decide to move 10x10, so use the block to move 10 steps and repeat 10 times. After that, the turtle head needs to face down to continue the shape. I turn right for 120 degrees and use the same formula to let the turtle move forward.

The next step is to get the plus, and it is not connected to 7. To start a new point, I let the turtle move to the location I want by using the jump stitch feature. I allow the turtle move without going down and turn to the direction I want to do the jump stitch, and once the turtle gets to the point I want, I turned off the jump stitch. Since the turtle head faces down, and I want the turtle to move right, I have to turn the turtle head in the right direction. I use point in direction 90 and move the distance I want. Then I use the same jump stitch feature and point in direction feature to let the turtle finished the plus.

The next step is to get the 2. For this, I use a little trick. I got the 2 by using a draw text block. Here, I let the turtle draw 2 with the size 90. I did not use the jump stitch feature at this step; instead, I use the when space key press and go to the mouse-pointer direction feature. Therefore, the 2 can go to any direction I want it to go.

I use the same mouse-pointed direction for drawing the 9. By going to the pointed direction and not having a track, I use the jump stitch feature. To get the circle part of the 9, I use to turn left for 7 degrees and move in small steps and repeat in more times. For getting the bottom part of 9 with a little curve, I let the turtle turn 15 degrees and move in a bigger step every time and repeat in fewer times.

The final step is to the equal symbol. I use the same mouse-pointed direction, jump stitch, and moving step feature to get the = sign.


Comments